Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser designed for CAN buses. It is discreet and does not have LED indicators or key fobs, and is hidden within the wiring of the vehicle.
The user can also deactivate the system temporarily using Transport Mode when renting their vehicle. This guide will take you through the steps of installing a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your vehicle from key cloning attacks, hacking attacks and relay attacks. The system is directly connected to your car's ECU and is protected by a unique PIN code that you choose. It is undetectable by thieves using diagnostic scanners or other modern methods. It cannot be disabled by cutting circuits.
The system is easy to use, however it is essential to have a professional installation to ensure a secure and secure connection with your vehicle's ECU. An approved installer from Thatcham can assist in the installation and programming of your Ghost system. They can also recommend a tracking or alarm system to complete the protection package for your vehicle.
First, the installer needs to disconnect your battery in order to avoid the possibility of airbag deployment and short circuits. When the battery is disconnected, the installer can be able to work safely. Basic hand tools are useful to make precise connections and a multimeter may be used to test the electrical properties and safety. Insulation tape and cable tie are crucial to ensure connections are secure and keep wiring neat. The Ghost Immobiliser user's guide will provide specific guidelines tailored to your model.
During the installation process, it's essential to choose a grounding point that's free of paint and debris. Installers should also make sure that the immobiliser's wires, CAN H and can L are connected to the proper ECU ports. Based on the model, these wires might need to be soldered or plugged into. To ensure a secure and long-lasting connection it is recommended you choose a high-quality plug.
After the installation is completed Once the installation is completed, the customer can enable the Transport Mode. This allows the vehicle to be utilized by valet parking companies or mechanics without needing to know the pin code. To do this, the customer must press the button for service on the dashboard five times in a matter of 2 seconds. The system will confirm this by displaying 5 indicators.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA verified and Thatcham approved. It's an excellent choice for those who rent their vehicles often on platforms like Turo. An immobiliser can lower insurance costs, as it greatly reduces the chance of theft.
Getting Started
If you are looking for a solution that will secure your vehicle from thieves You can't go wrong with an autowatch ghost immobiliser. It protects your vehicle from being started even when a criminal steals or copies the key. It's possible due to its advanced technology, which prevents the engine from starting until the right PIN code has been entered.
The device works by connecting to the CAN bus network of your vehicle, allowing it to communicate with the ECU directly. It makes use of buttons already on the dashboard and the steering wheel to create a unique sequence only you know and makes it impossible for anyone else to start your car. This is the ultimate security system to protect your most precious possessions, keeping its value intact when you want to sell it in the future.
Installing a ghost ignition is an easy process, however, it is crucial to follow the steps carefully to avoid electrical issues and system malfunctions. You must first locate a 12V power supply and a good grounding on the car's chassis. After that, you can begin to connect the wires for the immobiliser. Be sure to use high-quality connectors and soldering techniques to ensure a strong connection. Insulate the connections using heat shrink tubing or insulation tape, as well as other materials to prevent short circuits of electricity.
Once the wires are connected, you can reconnect the battery and then turn on the engine to test the immobiliser's function. If everything is functioning properly, you can install it in a safe location under the dash or elsewhere in the vehicle. Be sure to conceal it in a secure manner so that thieves can't tamper with it.
ghost immobiliser price has been TASSA (Tracker and Aftermarket Security System Association) that means it's a top-quality deterrent to car thieves. It is a superior defense against key cloning, hacking, and relay attacks, and it isn't able to be disabled unless you know the code. The device is easy to use, and can be set up to a service valet setting so that your vehicle will not be activated when you take it for an MOT or servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system that's designed to prevent vehicle theft. It communicates with your vehicle's ECU and connects directly to the CAN bus. In contrast to other aftermarket systems that require the removal of circuit components The Ghost Immobiliser does not interfere with the factory settings of your vehicle.
The system is also unnoticeable by thieves using diagnostic scanners. This is because the system doesn't send and receive radio frequency signals and it uses the CAN data to communicate with your ECU. Additionally, it doesn't require any modification to your vehicle's existing key fobs.
Enter your sequence for disarming (either two or one buttons) and then turn on the ignition of your vehicle to use Ghost Immobiliser. The indicator will flash twice to confirm that you've entered the correct code. Now you can start your vehicle and drive in a safe manner.
Once installed The Ghost Immobiliser can secure your vehicle from hacking and key cloning while preserving the value of your most prized possession. In Transport Mode, you can temporarily disable the Ghost Immobiliser if you need to give your vehicle to service or valet parking.
To complete the Ghost Immobiliser installation, you'll need find the source of power that is constant (12V) and an earthing point. Be sure that both are well-insulated and can be touched. Cable ties are also suggested for bundling and securing the wires. This will reduce the chance of theft by thieves. To avoid making mistakes, double-check these points and mark them with the use of tape or labels. Examine all connections for signs they are wearing out. Loose connections can lead to system malfunctions, so be sure they're securely in place and properly insulated. Also, don't forget test the Ghost Immobiliser after the installation is complete. This will make sure that the unit is operating properly and that all connections and insulation are secure. If you encounter any issues, you must be sure to resolve them immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge car security system that seamlessly into your vehicle's ECU to stop unauthorised engine start. Its cutting-edge technology protects your vehicle against hacking and key cloning along with other methods used by thieves to steal cars. The Ghost also works in tandem with other alarm and tracking systems to give the ultimate vehicle protection. The Ghost's unmatched features, coupled with its discreet design, make it a popular choice for car enthusiasts as well as security-conscious drivers.
It is crucial to follow the steps of installation in order to ensure the correct integration of the Ghost Immobiliser. Consult the wiring diagram for the vehicle to assist you in locating and connecting the wires. You'll then need to identify the power and grounding sources. Once you have located them, you'll have to mark them so that they are easy to locate when installing. It is also essential to use high-quality tools and materials. Hand tools are essential to aid in making precise connections. A multimeter can verify electrical values, and ensure safety. Insulation tape and cable tie will ensure that all connections are tidy. A Ghost-specific user's guide is also available.
Before proceeding with the installation it is important to test the system by entering the PIN code and starting the vehicle. This will ensure that the immobiliser is working as it should and stop unauthorised vehicle starts. This procedure should be carried out regularly as part of your routine vehicle inspections in order to ensure that the system is working properly.
After the installation is completed Once the installation is complete, you can drive your car with confidence. The Ghost will keep your pride and joy safe from would-be thieves and ensure that nobody is able to take off with your vehicle without the correct PIN code. The Ghost can be paired with an approved Thatcham tracker, which detects attempts at theft or tampering. This will allow you to track your car in the event that it's stolen.
The Ghost can be used on a wide range of vehicles and is compatible with all major manufacturers. If you're looking to secure your vehicle using this advanced device, call Monty's Locksmith today to find out more about our installation and maintenance options. We are a TASSA Registered installer This certification ensures that we follow strict guidelines and procedures for installing our products. This assures customers as well as insurance companies and law enforcement agencies that all installations are carried out safely and properly.